- Articles
Achieving Cement Plug Success On The First Attempt
Successful cement plugs are rarely quick or easy. Placing a cement plug in an open hole horizontal well is especially difficult.

- Products
How Designing for Manufacturability Can Lower Total Cost
In the world of Computer Numerical Controlled (CNC) machining, the objective of designing for manufacturability is to create components at a lower cost and for easier assembly.

- Articles
“No Way The Floats Will Hold After All This”
338 ULTRA MAG High Flow float equipment with the Integral Debris Management System

- Case Studies
Annular Pressure Successfully Eliminated
The use of the Prenup enabled the use of an optimized cement slurry in which the thickening time was equal to placement time.

- Case Studies
Custom DV Built In Two Days, Frac’d Through 80 Stages
Prior to completion, 5.500 production casing was found to be leaking in the uncemented vertical.

- This is Citadel
Down Range Fundamentals – Where to Begin
Down Range Fundamentals is a series on lessons learned over a lifetime of experience.

- Articles
Casing Centralizer Selection 101
Casing centralizers are available in many shapes and sizes. It is important to understand the differences in each type and which is best suited to each application.
